How to flash any stock rom or costom rom on any android mobile using sp flash tool

These are the tutorials to Flash Stock Rom or any custom ROM using Smart Phone Flash Tool (SP Flash Tool) on any Android device.

Requirements: Your Android Smartphone should have at least 40-50%  (percent) of battery to perform the Flashing Full Process and stock ROM or custom ROM with Scatter file.

How to Flash Stock ROM using or custom ROM Smart Phone Flash Tool 

Step 1: First Download and install Android USB Driver on your computer. if Android USB Drivers are already installed to your Computer then skip this step.

Step 2: Power Off your Android Device and remove the Battery,SD Card and Sim/RIM Card (if it is removable)      

Step 3: Download the Custom Rom or Stock Rom that you want to Flash on your Android Smartphone and extract it to your Computer.      

Step 4: Download and Extract Smart Phone Flash Tool (SP Flash Tool) on Your Computer. After Extracting you will be able to see the following those files.

Step 5: Now Open Flash_tool.exe File.
Step 6: Once Smart Phone Flash Tool is launched, you will be able to see Scatter-loadingButton.

Step 7: In the Download Tab, Click on the scatter-loading button.

Step 8: Now, Find the Scatter File  (Note: you will find the scatter file in the Stock rom folder).

Step 9: Now, Click on the Download Button to start the Flashing Process.

Step 10: After that Press Volume Down or Volume Up key and connect your Device to Computer Using USB Data Cable. (without battery- if it is removable. Some Device need battery to start Flash Process ). Now Flash tools start Flash process and wait while flashing .
Step 11: Once Flashing is completed, a Green Ring will appear on screen.
Step 12: Close the Flash Tool and disconnect your Device from the computer.Now Power On your device . This may take Few Minute to Power On the Device. Enjoy !!

Popular posts from this blog

How to remove or add channels in Tata sky by sms

free download Raid (2018) 300MB 480P Pdvd Hindi movie